a

Door Engineering – Commercial & Industrial

Want a door that’s dependable, fast and looks sharp?

FF30 Performance Series

Door Engineering’s FF30 door system is built with all the benefits of our Elite standard Four-Fold door. The heavy-duty design and construction of our Four-Fold door enables it to function under high cycle and other severe conditions, which create chronic service and maintenance problems for the conventional door alternatives.

  • 7 second operation provides improved critical response time
  • Zinc coated sheeting for superior corrosion resistance
  • Monitored Safety Edges and Torque sensing for UL 325 Compliance
  • Factory installed 1″ insulated low-e glass for superior energy efficiency
  • Select up to four (4) rows of glass
  • Reduced installation time
  • Manual operation in a power outage event
Speed

Four-Fold doors clear the opening at an average speed of 24 inches per second. Conventional overhead and coiling doors operate between 8 to 12 inches per second.

  • 12’ x 14’ and 14’ x 14’ Four-Fold Door = Less than 7 seconds to open
  • 14’ x 14’ Overhead Door = 14 to 21 seconds to open

The high-speed operation of the Four-Fold door minimizes heating and cooling losses and reduces waiting time, increasing productivity and energy efficiency. The leading edge of each panel is always visible eliminating the risk of boom to door interference and costly repairs. With Door Engineering’s FF30 door systems you will always reach your destination on time when every second counts!

Horizontal Movement

The Four-Fold door moves horizontally rather than vertically, this allows an apparatus to move quickly and safely. As a result, the door is visible throughout the opening and closing motion allowing the driver to know the precise second the doorway is clear to exit. It is common with overhead sectional and coiling steel doors for delivery vehicles, pick-up trucks or even passenger cars to begin driving through the door opening after losing sight of the bottom of the door, only to hit the bottom panel as they move through the opening. A collision of this type will make it impossible to operate the door (especially with telescoping and coiling steel doors, which cannot tolerate any denting or deforming of the slats). In contrast, the Four-Fold door can operate with similar abuse.

Window Layout Options
  • Layout A – 4 Windows per Panel
  • Layout B – 3 Windows per Panel
  • Layout C – 2 Windows per Panel (Centered)
  • Layout D – 2 Windows per Panel (High)
  • Layout E – 1 Window per Panel
  • Layout F – No Windows
Manual Operation

Manual operation is available with the Four-Fold door system. With the simple pull of a cord, manual operation is quick and easy. It requires no springs under tension, time consuming chain hoists, or heavy lifting.

SAFETY FEATURES

Standard features include:

  • Fail-safe bump edges that sense obstructions that the photo eye and interior presence sensors may miss.
  • Exterior light curtain photo eyes that provide continuous protection from the floor to 72” in height to sense both objects and personnel in that area.
  • Torque sensing safety which is compliant with UL 325 safety standards
  • UL compliant spacing between all panels and conventional pinch points

Optional features include:

  • LZR-Widescan presence sensor that provides sensing of pedestrians with 3 independent sensing fields for opening and closing
  • Audio/Visual warning beacon that provides a horn, strobe, and verbal annunciator to provide warning prior to automatic closing and during the opening and closing motion.
MAINTENANCE

Standard preventative maintenance (PM) on Four-Fold doors includes applying grease to hinges and operators. With general yearly PM, Four-Fold door operators and components are designed to perform over 1 million cycles. Conventional sectional and coiling doors require constant spring and cable maintenance and replacement to keep them in safe working condition. Failure to keep up with costly PM on sectional and coiling steel doors can result in door failure, which can cause both damage to equipment and injury to personnel.

FF100 Solid Sheeted

  • Solid sheet styles to match your building. Four-Fold doors can be customized to match any building design!
  • The advanced design and construction of the Four-Fold door enables it to function under high cycle and other severe conditions
  • Ideal for many applications such as Fire Stations, Parking Garages, Auto Dealerships and Grain Facilities
SPEED

Four-Fold doors clear the opening at an average speed of 24 inches per second. Conventional overhead and coiling doors operate between 8 to 12 inches per second.

  • 14’ x 14’ Four-Fold Door = Less than 7 seconds to open
  • 14’ x 14’ Overhead Door = 14 to 21 seconds to open

The high-speed operation of the Four-Fold door minimizes heating and cooling losses and reduces waiting time, increasing productivity and energy efficiency.

HORIZONTAL MOVEMENT

The Four-Fold door moves horizontally rather than vertically. As a result, the door is visible throughout the opening motion allowing the driver to know the precise second the doorway is clear to exit. This allows an apparatus to move quickly and safely. It is common with overhead sectional and coiling steel doors for delivery vehicles, pick-up trucks or even passenger cars to begin driving through the door opening after losing sight of the bottom of the door, only to hit the bottom panel as they move through the opening. A collision of this type will make it impossible to operate the door (especially with telescoping and coiling steel doors, which cannot tolerate any denting or deforming of the slats). In contrast, the Four-Fold door is able to operate with similar abuse.

MAINTENANCE

Standard preventative maintenance (PM) on Four-Fold doors includes applying grease to hinges and operators. With general yearly PM, Four-Fold door operators and components are designed to perform over 1 million cycles. Conventional sectional and coiling doors require constant spring and cable maintenance and replacement to keep them in safe working condition. Failure to keep up with costly PM on sectional and coiling steel doors can result in door failure, which can cause both damage to equipment and injury to personnel.

SAFETY FEATURES

Standard features include: hinge guards that limit access to the hinge gap at each jamb and alert personnel to keep the area clear, fail-safe bump edges that sense obstructions that the phone eye and interior presence sensors may miss, and exterior light curtain photo eyes that provide continuous protection from the floor to 72” in height to sense both objects and personnel in that area. Optional features include: a LZR-Widescan presence sensor that provides sensing of pedestrians with 3 independent sensing fields for opening and closing, and an audio/visual warning beacon that provides a horn, strobe, and verbal annunciator to provide warning prior to automatic closing and during the opening and closing motion.

SALLYPORT SECURITY DOOR SYSTEM

Four-Fold sallyport door systems are a must for high security applications. Heavy duty tube steel constructed panels are available solid sheeted, glazed with security glass or inset with security of louvers. Designed to resist forced entry, sallyport systems feature detention grade locking mechanisms, tamperproof fasteners, ballistic resistant armor sheeting options and high-speed operation to assure your facility is secure.

FF200 Grille

  • Grille styles to match your building. Four-Fold doors can be customized to match any building design!
  • The advanced design and construction of the Four-Fold door enables it to function under high cycle and other severe conditions.
  • Ideal for many applications such as Fire Stations, Parking Garages, Auto Dealerships and Grain Facilities.
Speed

Four-Fold doors clear the opening at an average speed of 24 inches per second. Conventional overhead and coiling doors operate between 8 to 12 inches per second.

  • 14’ x 14’ Four-Fold Door = Less than 7 seconds to open
  • 14’ x 14’ Overhead Door = 14 to 21 seconds to open

The high-speed operation of the Four-Fold door minimizes heating and cooling losses and reduces waiting time, increasing productivity and energy efficiency.

Horizontal Movement

The Four-Fold door moves horizontally rather than vertically. As a result, the door is visible throughout the opening motion allowing the driver to know the precise second the doorway is clear to exit. This allows an apparatus to move quickly and safely. It is common with overhead sectional and coiling steel doors for delivery vehicles, pick-up trucks or even passenger cars to begin driving through the door opening after losing sight of the bottom of the door, only to hit the bottom panel as they move through the opening. A collision of this type will make it impossible to operate the door (especially with telescoping and coiling steel doors, which cannot tolerate any denting or deforming of the slats). In contrast, the Four-Fold door is able to operate with similar abuse.

Maintenance

Standard preventative maintenance (PM) on Four-Fold doors includes applying grease to hinges and operators. With general yearly PM, Four-Fold door operators and components are designed to perform over 1 million cycles. Conventional sectional and coiling doors require constant spring and cable maintenance and replacement to keep them in safe working condition. Failure to keep up with costly PM on sectional and coiling steel doors can result in door failure, which can cause both damage to equipment and injury to personnel.

Manual Operation

Manual operation is available with the Four-Fold door system. With the simple pull of a cord, manual operation is quick and easy. It requires no springs under tensions or time-consuming chain hoists or heavy lifting.

Safety Features

Standard features include: hinge guards that limit access to the hinge gap at each jamb and alert personnel to keep the area clear, fail-safe bump edges that sense obstructions that the phone eye and interior presence sensors may miss, and exterior light curtain photo eyes that provide continuous protection from the floor to 72” in height to sense both objects and personnel in that area. Optional features include a LZR-Widescan presence sensor that provides sensing of pedestrians with 3 independent sensing fields for opening and closing and an audio/visual warning beacon that provides a horn, strobe, and verbal annunciator to provide a warning prior to automatic closing and during the opening and closing motion.

Sallyport security door system

Four-Fold sallyport door systems are a must for high security applications. Heavy duty tube steel constructed panels are available solid sheeted, glazed with security glass or inset with security of louvers. Designed to resist forced entry, sallyport systems feature detention grade locking mechanisms, tamperproof fasteners, ballistic resistant armor sheeting options and high-speed operation to assure your facility is secure.

FF300 Glazed

  • Glaze finish doors to match your building. Four-Fold doors can be customized tomatch any building design!
  • The advanced design and construction of the Four-Fold door enabled it to function under high cycle and other severe conditions.
  • Ideal for many applications such as Fire Stations, Parking Garages, Auto Dealerships and Grain Facilties.
Speed

Four-Fold doors clear the opening at an average speed of 24 inches per second. Conventional overhead and coiling doors operate between 8 to 12 inches per second.

  • 14’ x 14’ Four-Fold Door = Less than 7 seconds to open
  • 14’ x 14’ Overhead Door = 14 to 21 seconds to open

The high-speed operation of the Four-Fold door minimizes heating and cooling losses and reduces waiting time, increasing productivity and energy efficiency.

Horizontal Movement

The Four-Fold door moves horizontally rather than vertically. As a result, the door is visible throughout the opening motion allowing the driver to know the precise second the doorway is clear to exit. This allows an apparatus to move quickly and safely. It is common with overhead sectional and coiling steel doors for delivery vehicles, pick-up trucks or even passenger cars to begin driving through the door opening after losing sight of the bottom of the door, only to hit the bottom panel as they move through the opening. A collision of this type will make it impossible to operate the door (especially with telescoping and coiling steel doors, which cannot tolerate any denting or deforming of the slats). In contrast, the Four-Fold door is able to operate with similar abuse.

Maintenance

Standard preventative maintenance (PM) on Four-Fold doors includes applying grease to hinges and operators. With general yearly PM, Four-Fold door operators and components are designed to perform over 1 million cycles. Conventional sectional and coiling doors require constant spring and cable maintenance and replacement to keep them in safe working condition. Failure to keep up with costly PM on sectional and coiling steel doors can result in door failure, which can cause both damage to equipment and injury to personnel.

Manual Operation

Manual operation is available with the Four-Fold door system. With the simple pull of a cord, manual operation is quick and easy. It requires no springs under tensions or time consuming chain hoists or heavy lifting.

Safety Features

Standard features include: hinge guards that limit access to the hinge gap at each jamb and alert personnel to keep the area clear, fail-safe bump edges that sense obstructions that the phone eye and interior presence sensors may miss, and exterior light curtain photo eyes that provide continuous protection from the floor to 72” in height to sense both objects and personnel in that area. Optional features include: a LZR-Widescan presence sensor that provides sensing of pedestrians with 3 independent sensing fields for opening and closing, and an audio/visual warning beacon that provides a horn, strobe, and verbal annunciator to provide warning prior to automatic closing and during the opening and closing motion.

Sallyport Security Door System

Four-Fold sallyport door systems are a must for high security applications. Heavy duty tube steel constructed panels are available solid sheeted, glazed with security glass or inset with security of louvers. Designed to resist forced entry, sallyport systems feature detention grade locking mechanisms, tamperproof fasteners, ballistic resistant armor sheeting options and high-speed operation to assure your facility is secure.

FF300/200/100-XT Exterior Folding

  • Four-Fold XT™ takes away the concern over limited apparatus bay space!
  • The operator is interior mounted while the door panels fold to the exterior, eliminating the bay space that is needed with the regular Four-Fold design.
  • Built with all the benefits of our standing Four-Fold door
  • The heavy-duty design and construction of our Four-Fold door enable it to function under high-cycle and other severe conditions.
Exterior Folding

Limited space in the apparatus bay can be concerning, but with Door Engineering’s Four-Fold XT inside-out design it is no longer an issue. The Four-Fold XT operator is interior mounted while the door panels fold to the exterior. This eliminates the bay space that is needed with the regular Four-Fold design.

Fonctionnalités

The Four-Fold XT door system is still built with all the benefits of our standard Four-Fold door. The heavy- duty design and construction of our Four-Fold door enables it to function under high cycle and other severe conditions, which create chronic service and maintenance problems for the conventional door alternatives.

Speed

Four-Fold doors clear the opening at an average speed of 24 inches per second. Conventional overhead and coiling doors operate between 8 to 12 inches per second.

  • 14’ x 14’ Four-Fold Door = Less than 7 seconds to open
  • 14’ x 14’ Overhead Door = 14 to 21 seconds to open

The high-speed operation of the Four-Fold door minimizes heating and cooling losses and reduces waiting time, increasing productivity and energy efficiency.

Horizontal Movement

The Four-Fold door moves horizontally rather than vertically. As a result, the door is visible throughout the opening motion allowing the driver to know the precise second the doorway is clear to exit. This allows an apparatus to move quickly and safely. It is common with overhead sectional and coiling steel doors for delivery vehicles, pick-up trucks or even passenger cars to begin driving through the door opening after losing sight of the bottom of the door, only to hit the bottom panel as they move through the opening. A collision of this type will make it impossible to operate the door (especially with telescoping and coiling steel doors, which cannot tolerate any denting or deforming of the slats). In contrast, the Four-Fold door is able to operate with similar abuse.

Maintenance

Standard preventative maintenance (PM) on Four-Fold doors includes applying grease to hinges and operators. With general yearly PM, Four-Fold door operators and components are designed to perform over 1 million cycles. Conventional sectional and coiling doors require constant spring and cable maintenance and replacement to keep them in safe working condition. Failure to keep up with costly PM on sectional and coiling steel doors can result in door failure, which can cause both damage to equipment and injury to personnel.

Manual Operation

Manual operation is available with the Four-Fold door system. With the simple pull of a cord, manual operation is quick and easy. It requires no springs under tensions or time consuming chain hoists or heavy lifting.

Safety Features

Standard features include: hinge guards that limit access to the hinge gap at each jamb and alert personnel to keep the area clear, fail-safe bump edges that sense obstructions that the phone eye and interior presence sensors may miss, and exterior light curtain photo eyes that provide continuous protection from the floor to 72” in height to sense both objects and personnel in that area. Optional features include: a LZR-Widescan presence sensor that provides sensing of pedestrians with 3 independent sensing fields for opening and closing, and an audio/visual warning beacon that provides a horn, strobe, and verbal annunciator to provide warning prior to automatic closing and during the opening and closing motion.

Sallyport Security Door system

Four-Fold sallyport door systems are a must for high security applications. Heavy duty tube steel constructed panels are available solid sheeted, glazed with security glass or inset with security of louvers. Designed to resist forced entry, sallyport systems feature detention grade locking mechanisms, tamperproof fasteners, ballistic resistant armor sheeting options and high-speed operation to assure your facility is secure.

Four-Fold GT

Door Engineering’s Four-Fold GT™, folding gate system is the ideal system for perimeter security access. The Four-Fold GT™ security gate systems require very little maintenance and provide high cycle, high speed durability, even in the harshest conditions. The GT features a manual release for easy manual operation and is UL325 Listed.

Panel Design options:

  • Galvanized woven mesh
  • Vertical bar grills
  • Louvers
  • Custom options available

Control Inputs for:

  • Safety devices
  • Loop detectors
  • Card readers
  • Other access devices
Speed

Four-Fold doors clear the opening at an average speed of 24 inches per second. Conventional overhead and coiling doors operate between 8 to 12 inches per second.

  • 14’ x 14’ Four-Fold Door = Less than 7 seconds to open
  • 14’ x 14’ Overhead Door = 14 to 21 seconds to open

The high-speed operation of the Four-Fold door minimizes heating and cooling losses and reduces waiting time, increasing productivity and energy efficiency.

Horizontal Movement

The Four-Fold door moves horizontally rather than vertically. As a result, the door is visible throughout the opening motion allowing the driver to know the precise second the doorway is clear to exit. This allows an apparatus to move quickly and safely. It is common with overhead sectional and coiling steel doors for delivery vehicles, pick-up trucks or even passenger cars to begin driving through the door opening after losing sight of the bottom of the door, only to hit the bottom panel as they move through the opening. A collision of this type will make it impossible to operate the door (especially with telescoping and coiling steel doors, which cannot tolerate any denting or deforming of the slats). In contrast, the Four-Fold door is able to operate with similar abuse.

Maintenance

Standard preventative maintenance (PM) on Four-Fold doors includes applying grease to hinges and operators. With general yearly PM, Four-Fold door operators and components are designed to perform over 1 million cycles. Conventional sectional and coiling doors require constant spring and cable maintenance and replacement to keep them in safe working condition. Failure to keep up with costly PM on sectional and coiling steel doors can result in door failure, which can cause both damage to equipment and injury to personnel.

Manual Operation

Manual operation is available with the Four-Fold door system. With the simple pull of a cord, manual operation is quick and easy. It requires no springs under tensions or time consuming chain hoists or heavy lifting.

Safety Features

Standard features include: hinge guards that limit access to the hinge gap at each jamb and alert personnel to keep the area clear, fail-safe bump edges that sense obstructions that the phone eye and interior presence sensors may miss, and exterior light curtain photo eyes that provide continuous protection from the floor to 72” in height to sense both objects and personnel in that area. Optional features include: a LZR-Widescan presence sensor that provides sensing of pedestrians with 3 independent sensing fields for opening and closing, and an audio/visual warning beacon that provides a horn, strobe, and verbal annunciator to provide warning prior to automatic closing and during the opening and closing motion.

Sallyport Security Door System

Four-Fold sallyport door systems are a must for high security applications. Heavy duty tube steel constructed panels are available solid sheeted, glazed with security glass or inset with security of louvers. Designed to resist forced entry, sallyport systems feature detention grade locking mechanisms, tamperproof fasteners, ballistic resistant armor sheeting options and high-speed operation to assure your facility is secure.

FF701 Hurricane

Door Engineering’s Four-Fold 701 has been tested and approved for High Velocity Hurricane Zones, up to 120psf and has been approved by the Florida Building Code (#FL17136). The Hurricane Rated door systems are built with 11-gauge structural steel tube and 14-gauge cladding. And you still get options with this door system! It is available in an XT (exterior folding) configuration for more flexibility. Choose from a wide variety of glazing layouts from no glass to full glass.

Speed

Four-Fold doors clear the opening at an average speed of 24 inches per second. Conventional overhead and coiling doors operate between 8 to 12 inches per second.

  • 14’ x 14’ Four-Fold Door = Less than 7 seconds to open
  • 14’ x 14’ Overhead Door = 14 to 21 seconds to open

The high-speed operation of the Four-Fold door minimizes heating and cooling losses and reduces waiting time, increasing productivity and energy efficiency.

Horizontal Movement

The Four-Fold door moves horizontally rather than vertically. As a result, the door is visible throughout the opening motion allowing the driver to know the precise second the doorway is clear to exit. This allows an apparatus to move quickly and safely. It is common with overhead sectional and coiling steel doors for delivery vehicles, pick-up trucks or even passenger cars to begin driving through the door opening after losing sight of the bottom of the door, only to hit the bottom panel as they move through the opening. A collision of this type will make it impossible to operate the door (especially with telescoping and coiling steel doors, which cannot tolerate any denting or deforming of the slats). In contrast, the Four-Fold door is able to operate with similar abuse.

Maintenance

Standard preventative maintenance (PM) on Four-Fold doors includes applying grease to hinges and operators. With general yearly PM, Four-Fold door operators and components are designed to perform over 1 million cycles. Conventional sectional and coiling doors require constant spring and cable maintenance and replacement to keep them in safe working condition. Failure to keep up with costly PM on sectional and coiling steel doors can result in door failure, which can cause both damage to equipment and injury to personnel.

Manual Operation

Manual operation is available with the Four-Fold door system. With the simple pull of a cord, manual operation is quick and easy. It requires no springs under tensions or time consuming chain hoists or heavy lifting.

Safety Features

Standard features include: hinge guards that limit access to the hinge gap at each jamb and alert personnel to keep the area clear, fail-safe bump edges that sense obstructions that the phone eye and interior presence sensors may miss, and exterior light curtain photo eyes that provide continuous protection from the floor to 72” in height to sense both objects and personnel in that area. Optional features include: a LZR-Widescan presence sensor that provides sensing of pedestrians with 3 independent sensing fields for opening and closing, and an audio/visual warning beacon that provides a horn, strobe, and verbal annunciator to provide warning prior to automatic closing and during the opening and closing motion.

Sallyport Security Door System

Four-Fold sallyport door systems are a must for high security applications. Heavy duty tube steel constructed panels are available solid sheeted, glazed with security glass or inset with security of louvers. Designed to resist forced entry, sallyport systems feature detention grade locking mechanisms, tamperproof fasteners, ballistic resistant armor sheeting options and high-speed operation to assure your facility is secure.

FF701-XT Hurricane Exterior Folding

Door Engineering’s Four-Fold XT™ takes away the concern over limited apparatus bay space! The Four-Fold XT™ operator is interior mounted while the door panels fold to the exterior. This eliminates the bay space that is needed with the regular Four-Fold design.The Four-Fold XT™ door system is still built with all the benefits of our standard Four-Fold door. The heavy-duty design and construction of our Four-Fold door enable it to function under high-cycle and other severe conditions, which create chronic service and maintenance problems for the conventional door alternatives.

Hurricane Rated
Door Engineering’s Four-Fold 701 has been tested and approved for High Velocity Hurricane Zones, up to 120psf and has been approved by the Florida Building Code (#FL17136). The Hurricane Rated door systems are built with 11-gauge structural steel tube and 14-gauge cladding. And you still get options with this door system! It is available in an XT (exterior folding) configuration for more flexibility. Choose from a wide variety of glazing layouts from no glass to full glass.

Speed

Four-Fold doors clear the opening at an average speed of 24 inches per second. Conventional overhead and coiling doors operate between 8 to 12 inches per second.

  • 14’ x 14’ Four-Fold Door = Less than 7 seconds to open
  • 14’ x 14’ Overhead Door = 14 to 21 seconds to open

The high-speed operation of the Four-Fold door minimizes heating and cooling losses and reduces waiting time, increasing productivity and energy efficiency.

Horizontal Movement

The Four-Fold door moves horizontally rather than vertically. As a result, the door is visible throughout the opening motion allowing the driver to know the precise second the doorway is clear to exit. This allows an apparatus to move quickly and safely. It is common with overhead sectional and coiling steel doors for delivery vehicles, pick-up trucks or even passenger cars to begin driving through the door opening after losing sight of the bottom of the door, only to hit the bottom panel as they move through the opening. A collision of this type will make it impossible to operate the door (especially with telescoping and coiling steel doors, which cannot tolerate any denting or deforming of the slats). In contrast, the Four-Fold door is able to operate with similar abuse.

Maintenance

Standard preventative maintenance (PM) on Four-Fold doors includes applying grease to hinges and operators. With general yearly PM, Four-Fold door operators and components are designed to perform over 1 million cycles. Conventional sectional and coiling doors require constant spring and cable maintenance and replacement to keep them in safe working condition. Failure to keep up with costly PM on sectional and coiling steel doors can result in door failure, which can cause both damage to equipment and injury to personnel.

Manual Operation

Manual operation is available with the Four-Fold door system. With the simple pull of a cord, manual operation is quick and easy. It requires no springs under tensions or time consuming chain hoists or heavy lifting.

Safety Features

Standard features include: hinge guards that limit access to the hinge gap at each jamb and alert personnel to keep the area clear, fail-safe bump edges that sense obstructions that the phone eye and interior presence sensors may miss, and exterior light curtain photo eyes that provide continuous protection from the floor to 72” in height to sense both objects and personnel in that area. Optional features include: a LZR-Widescan presence sensor that provides sensing of pedestrians with 3 independent sensing fields for opening and closing, and an audio/visual warning beacon that provides a horn, strobe, and verbal annunciator to provide warning prior to automatic closing and during the opening and closing motion.

Sallyport Security Door System

Four-Fold sallyport door systems are a must for high security applications. Heavy duty tube steel constructed panels are available solid sheeted, glazed with security glass or inset with security of louvers. Designed to resist forced entry, sallyport systems feature detention grade locking mechanisms, tamperproof fasteners, ballistic resistant armor sheeting options and high-speed operation to assure your facility is secure.

FF800 Tornado FEME 361/ICC 500

The FF800, Tornado Resistant Four-Fold door system has been designed for, tested & passed ICC-500 & FEMA 361 storm shelter requirements. Made with a heavier construction than the standard Four-Fold door system, the FF800 is built to withstand flying debris and extreme wind loads. It is made with 3/16” tubing and 12-gauge sheeting, reinforced window frames and 1 1/4” impact glass. A power or manual operated cremone lock secures the door. The FF800 is available with up to four (4) 12” x 12” windows.

Speed

Four-Fold doors clear the opening at an average speed of 24 inches per second. Conventional overhead and coiling doors operate between 8 to 12 inches per second.

  • 14’ x 14’ Four-Fold Door = Less than 7 seconds to open
  • 14’ x 14’ Overhead Door = 14 to 21 seconds to open

The high-speed operation of the Four-Fold door minimizes heating and cooling losses and reduces waiting time, increasing productivity and energy efficiency.

Horizontal Movement

The Four-Fold door moves horizontally rather than vertically. As a result, the door is visible throughout the opening motion allowing the driver to know the precise second the doorway is clear to exit. This allows an apparatus to move quickly and safely. It is common with overhead sectional and coiling steel doors for delivery vehicles, pick-up trucks or even passenger cars to begin driving through the door opening after losing sight of the bottom of the door, only to hit the bottom panel as they move through the opening. A collision of this type will make it impossible to operate the door (especially with telescoping and coiling steel doors, which cannot tolerate any denting or deforming of the slats). In contrast, the Four-Fold door is able to operate with similar abuse.

Maintenance

Standard preventative maintenance (PM) on Four-Fold doors includes applying grease to hinges and operators. With general yearly PM, Four-Fold door operators and components are designed to perform over 1 million cycles. Conventional sectional and coiling doors require constant spring and cable maintenance and replacement to keep them in safe working condition. Failure to keep up with costly PM on sectional and coiling steel doors can result in door failure, which can cause both damage to equipment and injury to personnel.

Manual Operation

Manual operation is available with the Four-Fold door system. With the simple pull of a cord, manual operation is quick and easy. It requires no springs under tensions or time consuming chain hoists or heavy lifting.

Safety Features

Standard features include: hinge guards that limit access to the hinge gap at each jamb and alert personnel to keep the area clear, fail-safe bump edges that sense obstructions that the phone eye and interior presence sensors may miss, and exterior light curtain photo eyes that provide continuous protection from the floor to 72” in height to sense both objects and personnel in that area. Optional features include: a LZR-Widescan presence sensor that provides sensing of pedestrians with 3 independent sensing fields for opening and closing, and an audio/visual warning beacon that provides a horn, strobe, and verbal annunciator to provide warning prior to automatic closing and during the opening and closing motion.

Sallyport Security Door System

Four-Fold sallyport door systems are a must for high security applications. Heavy duty tube steel constructed panels are available solid sheeted, glazed with security glass or inset with security of louvers. Designed to resist forced entry, sallyport systems feature detention grade locking mechanisms, tamperproof fasteners, ballistic resistant armor sheeting options and high-speed operation to assure your facility is secure.

VOUS AIMEZ CE QUE VOUS VOYEZ?

Communiquez avec nous pour des partenariats, de nouveaux projets et des demandes de renseignements.